home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
SGI Developer Toolbox 6.1
/
SGI Developer Toolbox 6.1 - Disc 4.iso
/
public
/
fax
/
src
/
etc
/
config.class2
< prev
next >
Wrap
Text File
|
1994-08-01
|
3KB
|
77 lines
# $Header: /usr/people/sam/fax/etc/RCS/config.class2,v 1.10 1993/10/19 17:34:10 sam Rel $
#
# Generic Class 2 modem configuration.
#
# EDIT THIS CONFIGURATION TO REFLECT YOUR SETUP
#
CountryCode: 1 # USA
LongDistancePrefix: 1
InternationalPrefix: 011
AreaCode: 415
DialStringRules: etc/dialrules
FAXNumber: +1.415.965.7824
ServerTracing: 1 # log server-related operations
SessionTracing: 11 # log server-related operations
RecvFileMode: 0600 # recvd facsimile are not public
LogFileMode: 0600 # private log files
DeviceMode: 0600 # device is accessible only to uucp/fax
#QualifyTSI: etc/tsi # accept facsimile from anyone
SpeakerVolume: off # machine's are already too loud
RingsBeforeAnswer: 1 # answer on first ring
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class2 # use this to supply a hint
ModemRate: 19200 # max rate for DCE-DTE communication
ModemFlowControl: xonxoff # XON/XOFF flow control assumed
ModemSetupDTRCmd: &D2 # setup so DTR drop resets modem
ModemSetupDCDCmd: &C1 # setup so DCD reflects carrier (or not)
#GettyArgs: "-h %l dx_%s" # requires modem to auto-detect fax/data
#
# We normally append the "@" symbol to the dial string so that
# the modem will wait 5 seconds before attempting to connect
# and return result codes that distinguish between no carrier
# and no answer. This makes it possible to avoid problems with
# repeatedly dialing a number that doesn't have a fax machine
# (kudos to Stuart Lynne for this trick.)
#
# NB: If you need to prefix phone numbers to get through a PBX,
# put it in the ModemDialCmd; e.g. "DT9%s@".
#
ModemDialCmd: DT%s@ # T for tone dialing, @ for silence
#
# Other possible configuration stuff. The default strings are
# shown below. Only those that are different from the defaults
# need to be included in the configuration file.
#
ModemResetCmds: "" # stuff to do when modem is reset
ModemAnswerCmd: "A" # use this to answer phone
ModemFlowControlCmd: &K4 # set desired flow control method
ModemNoAutoAnswerCmd: S0=0 # disable auto-answer
#
# Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.
# Note that we both turn the speaker on/off and set volume.
#
ModemSetVolumeCmd: "M0 L0M1 L1M1 L2M1 L3M1"
ModemEchoOffCmd: E0 # disable command echo
ModemVerboseResultsCmd: V1 # enable verbose command results
ModemResultCodesCmd: Q0 # enable result codes
ModemOnHookCmd: H0 # place phone on hook (hangup)
ModemSoftResetCmd: Z # do soft reset of modem
ModemWaitTimeCmd: S7=30 # wait 30 seconds for carrier
ModemCommaPauseTimeCmd: S8=2 # comma pause time is 2 seconds
ModemRecvFillOrder: LSB2MSB # bit order of received facsimile
ModemSendFillOrder: LSB2MSB # bit order modem expects for transmit
#
# Configuration parameters for Class 2 modems.
#
Class2BORCmd: BOR=0 # bit order for phase B/C/D (direct)
#
# If Class2RecvDataTrigger is not set, then it is selected according
# the modem model and manufacturer. ZyXEL and Rockwell RC32ACL-based
# modems use DC2. All others are assumed to use DC1.
#
Class2RecvDataTrigger: "" # character sent to modem to start recv
Class2XmitWaitForXON: no # if true, wait for XON before send